How To Program A Ford Transponder Key Without Original. As this is done, get back to the “on” position. For the next 10 minutes and 30 seconds, keep it in this position.

How To Program A Ford Transponder Key Without Original from

Firstly, insert the new (unprogrammed) cut transponder key in the ignition. Then you will take out the wires that are connected to it. Leave it in the “on” position for 10 and a half minute.

Now Turn It Back On.

Furthermore, turn on your car. Again, get to the “off” spot and put it back to the “on.” spot as well. You’ll put these back later, but first, we need to program your new key.

Awhile This Process, Keep An Eye On The Dashboard Of Your Car.

Before the timer reaches 45 seconds, switch the key off. Leave it on for about 15 minutes until. That is, 10 minutes and 30 seconds.

Except You Get A Master Key Or Professional Locksmith In Your Locality Or Contact The Car Dealer, It Appears That You Cannot Program A Transponder Key Without The Original.

Get inside your car and enter the transponder key inside the ignition of your car. Leave it on for about 15 minutes until you notice that the security light is gone. Turn the key to the “on” position.

See also  Capital Digestive Care Rockville Patient Portal

And You Don’t Need Your Vin Number For It Either.

Turn the device off and on again; The light should turn on for about 4 seconds before going off. How to program a transponder key without original:

You Can Use This To Duplicate Other Keys.

You can program your vehicle by following some simple steps that are determined by what type of car it is! Those who have been affected by this should contact their local car dealership holder right away. When the light goes off, you must repeat the process a total of three times until the key is programmed.